How to Hang Curtains Using Command Hooks

No Comments

Any home can benefit from the charm that curtains can bring. They may only act as decorative elements or block off the light. Many landlords forbid tenants from drilling holes in walls, which are required to install curtain rod hooks. Thankfully, Command hooks can still be used to install curtain rods.

Although placing drapes in front of your home’s windows can assist trap heat inside and prevent cold air from entering, the reality is that it can be anything from straightforward.

It doesn’t take long to become frustrated between purchasing all the required components, calculating where to place your curtain hooks, and drilling holes into your wall. Our curtains fitters in Dubai have shared some tips to hang curtains without drilling any holes.

Reasons for Hanging Curtains Using Command Hooks

There are numerous good reasons not to make holes in your wall. You might be afraid to commit or rent or doubt your drill-handling skills. You’re right to be hesitant because there are frequently temporary alternatives to screws and nails.

You have more alternatives for hanging curtains than just mounting curtain rods and installing brackets. You can use magnets, glue, or natural tension to complete the task. There are so many non-drilling curtain hanging methods that you can choose your favorite. And almost all of them seem less difficult than using a drill.

How to Use Adhesive Hooks to Hang Curtains

How to Use Adhesive Hooks to Hang Curtains

Adhesive hooks adhere to your wall, are available in many different styles, and work with most straight curtain rods. The method for hanging curtains with sticky hooks is shown below.

Step 1: Purchase the Proper Adhesive Hooks.

For each window, you’ll need two adhesive hooks. Get a set of adhesive hooks that are powerful enough to hold curtains and stylish enough to hang on your walls. Adhesive hooks can withstand a variety of weights and designs.

Step 2: Attach the Wall Hooks

Observe the guidelines provided with the adhesive hooks. Before carefully attaching your adhesive hooks to your walls, peel the backing off each one.

Related: Picking the Optimal Curtain Color for a Blue Wall

Step 3: Allow the Hooks to Sit

Give the hooks an hour to sit. Your adhesive hooks could loose from your wall if you install your curtains too fast.

Step 4: Attach your Shower Curtain

Place the fabric rod on the hooks, then slide the curtains onto the rod.

Learn More: Want a New Shower Curtain? Here’s Your Buying Guide

How to Use a Tension Rod to Hang Curtains

How to Use a Tension Rod to Hang Curtains

Inside your window is a tension rod. They are limited in style and don’t need hooks or hardware.

Tip: Criteria for Selecting an Appropriate Curtain Rod

Step 1: Purchase the Proper Tension Rod.

Measure the interior of your window because tension rods come in various widths. You should measure the distance between each protruding surface since the tension rod must fit between them.

Curtain Inspiration: Bay Windows Curtain Ideas that Will Impress

Find a tension rod that fits inside your window, and proceed. Check the rod’s minimum and maximum lengths because they are changeable.

Step 2: Adjust the Rod.

To your window, raise the tension rod. Once it is approximately 1 inch shorter than your window, adjust the rod as necessary.

Step 3: Insert the Rod Inside your Window

Place the tension rod’s desired end there. Once the other end is exactly where you want it, extend the tension rod.

Step 4: Hang your Curtains and Tighten the rod.

Put your tension rod inside your window, then carefully slide your curtains onto it. Lengthen the rod a little further to ensure enough pressure to keep it in place. When you let go of the rod, you want it to be secure enough to remain inside your window.

Creative: Hanging curtains in a corner window, made easy

Putting Up Curtains A Magnetic Rod is Used

Putting Up Curtains A Magnetic Rod is Used

Magnetic rods stick to metal surfaces and walls. They come in a variety of designs, and some of them have sticky strips that may be used to adhere the rods to various materials.

Step 1: Purchase the Proper Magnetic Rod 

Find a magnetic curtain rod that is strong enough to retain your curtains, long enough to frame your window, and attractive enough to hang on your wall.

Step 2: Install the Rod on Your Wall 

Ensure the curtain rod is in the desired location and firmly fastened to the wall.

Step 3: Install your Curtains

To slide your blinds over the pole, remove them. Rejoin the rod to the wall after that.

Mix and match: How to Pair Curtains and Blinds?

Using a Stick-On Rod to Hang Curtains Stick-on rods

Using a Stick-On Rod to Hang Curtains Stick-on rods

There are many different types, some of which come with hardware to attach the rods more firmly.

Step 1: Purchase the Proper Stick-on Rod

Size, strength, and style should all be considered when buying stick-on curtain rods. Find a curtain rod that fits your window’s width, is sturdy enough for your curtains, and is stylish enough for your room.

Step 2: Attach the Rod to Your Wall

Check the installation guidelines that come with your curtain rod. Your curtain rod probably has two sticky brackets. Those brackets can probably be installed by removing their backing and putting them on your wall.

Step 3: Let the Rod Sit 

Before hanging your curtains, let the curtain rod sit on the wall for an hour. If you do this, the rod shouldn’t come off your wall shortly after you attach it.

Want to hang curtains like a pro? Here’s Interior Designer’s Curtain Hanging Secrets

Step 4: Install your Curtains 

Your curtain rod should now accommodate your drapes. You might need to raise your curtain rod out of the bracket or cut off one end to accomplish this.

How to Install a Twist-and-Fit Rod for Curtains

How to Install a Twist-and-Fit Rod for Curtains

Twist-and-fit rods are installed within your window, just like tension rods. However, they are made to look like conventional curtain rods by using artistic flourishes.

Step 1: Purchase the Appropriate Twist-and-Fit rod.

Measure your window. Find a twist-and-fit rod that fits there and is stylish enough to exhibit in your space after that. Since twist-and-fit rods can be adjusted, you should consider the minimum and maximum lengths of the rod while determining size.

Curtain Lengths: How to Choose the Perfect Fit?

Step 2: Adjust the Rod.

The twist-and-fit rod should be placed within your window. Twist them until they settle down.

Step 3: Hang Curtain So that it Tighten the Rod

Your curtain rod should now accommodate your drapes. After that, insert the rod so that one end touches the inside of one of your windows. The rod should be extended till the opposite side is reached or until it is sufficiently tight to remain in place.

Related Articles